Mold On Stainless Steel Tanks
Posted 17 October 2010 - 01:41 AM
Posted 17 December 2011 - 07:41 PM
If it was empty try using a mildly alkaline solution. If you can remove the bladder and soak it for a bit even better. For the other spots (I cant exactly picture your exact problem area) try using a plastic bristle brush with the mild alkaline solution. If you have any pictures that would help even more.
Posted 18 December 2011 - 05:34 AM
Posted 18 December 2011 - 01:46 PM
Posted 18 December 2011 - 02:03 PM
Posted 10 August 2012 - 08:55 PM
That being said, Greg is right in that if you want to get your equipment really clean, you have to strip it down to its components. I am in the process of getting the crush pad equipment ready for the upcoming harvest at my work, so I have been up to my elbows in caustic for the past week or so, all the while cursing the lazy interns who did such a miserable job cleaning the stuff at the end of last harvest!
Posted 11 August 2012 - 02:24 AM
Isnt it basically different compounds leading to a final result hydrogen peroxide and other alkeline compounds to creat a strong oxidizer and base.
I like 5 star products like PBW for cleaning
To my understanding its sodium metasilicate,sodium carbonate and sodium percarbonate.
Posted 11 August 2012 - 01:50 PM
Posted 11 August 2012 - 04:20 PM
Doesnt sodium percarbonate releases hydrogen peroxide = "active oxygen" part of cleansers ?
BTW, it is also not an oxydizer.
I'm trying to understand what are the benifits of PWB over just sodium peroxide 5% solution (from very cheap pallets).
Posted 12 August 2012 - 03:23 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users